G200 Series
MOTTA G200 combines hydraulic service and slideway lubrication in machine tools designed to use one oil for both duties. High-quality mineral base oils and a dedicated additive system provide controlled friction, load-carrying lubrication and protection of working metal surfaces.
The formulation helps suppress stick-slip and chatter on heavily loaded horizontal and vertical ways, keeping low-speed feed movement smooth and consistent. Adhesion, water separation and oxidation stability help maintain the lubricating film and oil condition through demanding machine-tool service.
Performance and Benefits
Smooth, controlled movement
Friction control reduces the tendency to stick-slip at low feed speeds, helping maintain positioning consistency and surface finish.
Film retention under load
Adhesive lubrication keeps oil on guide surfaces while load-carrying and anti-wear properties protect heavily loaded contact areas.
Clean separation and surface protection
Water-separating behaviour helps remove water from the oil. Rust protection and multi-metal compatibility protect the lubrication circuit and ways.
Stable dual-purpose service
Oxidation and thermal stability help resist oil deterioration, combining hydraulic lubrication and slideway protection in one specified lubricant.
Principal Applications
- Machine tools specifying a common oil for hydraulic circuits and slideways.
- Horizontal and vertical ways requiring controlled friction and load-carrying lubrication.
- VG 32 and VG 68 duties selected to the machine's viscosity and dual-service requirements.
Use where the machine specifies hydraulic/slideway dual service. Check both circuit requirements; ordinary hydraulic oil or a dedicated way oil is not automatically an equivalent substitute.
Performance References
Viscosity grades follow ISO 3448. Slideway classification references: ISO 6743-13, family G; DIN 51502, CGLP.
Typical Physical and Chemical Properties
Swipe horizontally to view the complete table.
Scroll horizontally to view all grades and units.
| Property | Test Method | Unit | 32 | 68 |
|---|---|---|---|---|
| ISO Viscosity Grade | ISO 3448 | - | 32 | 68 |
| Kinematic Viscosity @ 40°C | ASTM D445 | cSt | 32 | 68 |
| Kinematic Viscosity @ 100°C | ASTM D445 | cSt | 5.31 | 8.56 |
| Viscosity Index | ASTM D2270 | - | 96 | 96 |
| Pour Point | ASTM D97 | °C | -12 | -6 |
| Flash Point (COC) | ASTM D92 | °C | 210 | 218 |
Available in 18 L pails and 200 L drums.
Packaging illustration
