HYDRAULIC OILS / Y SERIES
MOTTA Y Series combines pump wear protection, oxidation stability and hydraulic-system cleanliness across four distinct product ranges. Compare the mineral, low-zinc and PAO synthetic options by operating duty, then select the viscosity and grade-specific performance references required by your equipment.
Four product ranges. A range of viscosity grades. Product-specific technical documents.
Know the product? Search the range →Y100 / Y200 / Y300 / Y400
The product names are not the whole story. Start with the system requirement and compare the formulation focus below.
A balanced mineral-oil formulation for conventional industrial and mobile hydraulic circuits operating under moderate temperature conditions. Combines pump protection, oxidation stability, corrosion control and water separation for practical everyday maintenance.
High-performance anti-wear mineral oils for high-pressure, high-output systems, including close-clearance servo valves and CNC equipment. Deposit control maintains clean oil passages and control components, with protection for pumps, valves and mixed-metal parts.
Low-zinc anti-wear chemistry for demanding industrial and mobile systems. Combines deposit control, oxidation stability and air release for clean, responsive hydraulic circuits. Select the HM/HLP or HV/HVLP performance category by the applicable viscosity grade.
Wax-free PAO base stocks combine cold-start pumpability with oxidation resistance and anti-wear protection at elevated oil temperatures. Designed for demanding hydraulic duty and specified systems that also lubricate gears or bearings.
A CLEARER WAY TO UNDERSTAND HYDRAULIC OIL
An oil must flow during start-up and maintain the lubricating protection required at operating temperature. Explore these two operating conditions, then select the viscosity and product range for your equipment.
Qualitative principle illustration — not a product test curve.
Reduced-motion mode: use the three steps without animation.
Cold-start conditions affect oil flow and pump supply. Check the equipment's starting-viscosity requirement rather than choosing by ambient temperature alone.
As oil temperature rises, viscosity decreases. Select a grade that meets the equipment requirement through the operating conditions, not only at start-up.
Choose the viscosity and performance category together. Compare the individual range and grade references below; a higher viscosity or a different base oil is not automatically a substitute.
Open a range for the complete product description, principal applications, viscosity-specific performance references, physical properties and technical-document downloads.
MOTTA Y100 is a range of mineral anti-wear hydraulic oils for industrial plant and mobile equipment operating under moderate conditions. Quality base oils and a balanced additive system combine pump wear protection with oxidation stability, corrosion control and effective water separation.
The formulation maintains lubricating protection in medium- to heavy-duty service while controlling the oil degradation that contributes to deposits and filter loading. The range provides a practical lubrication solution for conventional hydraulic circuits, particularly where operating conditions make occasional moisture ingress, leakage or contamination difficult to avoid.
Anti-wear performance protects loaded pump contacts and other lubricated surfaces, reducing wear in service and helping maintain hydraulic efficiency over the equipment's working life.
Resistance to oxidation and chemical degradation limits sludge and deposit formation, maintaining oil condition during sustained operation and reducing contamination-related maintenance.
Rust and corrosion protection safeguards system components exposed to moisture and limits the effect of water on metal surfaces during operation and standstill.
Effective water separation allows free water to be removed from the reservoir. Filtration performance in the presence of trace moisture helps limit filter blockage and maintain oil circulation.
Select the viscosity grade for pump requirements, start-up temperature and operating oil temperature. Remove accumulated water and correct contamination sources during maintenance.
Scroll horizontally to view all grades and units.
| Reference | ISO VG grades |
|---|---|
| Denison HF-0 / HF-1 / HF-2 | 32, 46, 68 |
| ASTM D6158 (HM) | 32, 46, 68 |
| DIN 51524-2 (HLP) | 32, 46, 68, 100 |
| ISO 11158 (HM) | 32, 46, 68, 100, 150 |
| Fives Cincinnati P-68 | 32 |
| Fives Cincinnati P-70 | 46 |
| Fives Cincinnati P-69 | 68 |
Scroll horizontally to view all grades and units.
| Property | Test Method | Unit | 32 | 46 | 68 | 100 | 150 |
|---|---|---|---|---|---|---|---|
| Kinematic Viscosity @ 40°C | ASTM D445 | cSt | 32 | 46 | 68 | 100 | 150 |
| Kinematic Viscosity @ 100°C | ASTM D445 | cSt | 5.5 | 6.8 | 8.4 | 11.1 | 14.5 |
| Viscosity Index | ASTM D2270 | - | 103 | 100 | 106 | 95 | 95 |
| Pour Point | ASTM D97 | °C | -24 | -24 | -18 | -18 | -17 |
| Flash Point (COC) | ASTM D92 | °C | 212 | 230 | 234 | 243 | 258 |
MOTTA Y200 is a range of high-performance anti-wear hydraulic oils for high-pressure, high-output pumps and industrial hydraulic systems. Available in ISO VG 10, 22, 32, 46, 68, 100 and 150, the range serves demanding hydraulic circuits, including close-clearance servo valves and CNC machine tools.
Oxidation resistance and deposit control keep oil passages and control components clean, helping reduce maintenance downtime and extend effective oil and filter life. Anti-wear and corrosion protection safeguard pumps, valves and mixed-metal components, while controlled demulsibility maintains protection when incidental water contamination occurs.
Resists oil degradation during demanding service, limiting deposits that increase maintenance needs and helping extend effective oil and filter life.
Protects loaded components against wear, rust and corrosion, including surfaces operating with thin lubricating films. Helps preserve component condition and productive equipment service.
Provides protection when water contamination occurs, making the oil suited to systems where small amounts of water are difficult to avoid.
Reduces sludge and deposit formation in oil passages and close-clearance components, helping maintain control response and reduce maintenance interruptions.
Select the ISO viscosity grade for the pump design and operating temperature, using the equipment manufacturer's specified fluid requirements.
Scroll horizontally to view all grades and units.
| Reference | ISO VG grades |
|---|---|
| DIN 51524-2 (HLP) | 10, 22, 32, 46, 68, 100, 150 |
| ISO 11158 (HM) | 10, 22, 32, 46, 68, 100, 150 |
| ASTM D6158 (HM) | 10, 22, 32, 46, 68, 100, 150 |
Scroll horizontally to view all grades and units.
| Reference | ISO VG grades |
|---|---|
| Eaton I-286-S / M-2950-S | 32, 46, 68 |
| Fives Cincinnati P-68 | 32 |
| Fives Cincinnati P-70 | 46 |
| Fives Cincinnati P-69 | 68 |
| HUSKY HS 207 | 46 |
Scroll horizontally to view all grades and units.
| Property | Test Method | Unit | 10 | 22 | 32 | 46 | 68 | 100 | 150 |
|---|---|---|---|---|---|---|---|---|---|
| Kinematic Viscosity @ 40°C | ASTM D445 | cSt | 11 | 22 | 31.4 | 44.2 | 71.2 | 95.2 | 150 |
| Kinematic Viscosity @ 100°C | ASTM D445 | cSt | 2.6 | 4.5 | 5.4 | 6.6 | 8.5 | 10.8 | 14.5 |
| Viscosity Index | ASTM D2270 | - | 98 | 98 | 98 | 98 | 98 | 98 | 95 |
| Pour Point | ASTM D97 | °C | -30 | -30 | -27 | -27 | -21 | -20 | -17 |
| Flash Point (COC) | ASTM D92 | °C | 173 | 200 | 220 | 232 | 235 | 248 | 258 |
| Density @ 15°C | ASTM D4052 | kg/m³ | 844 | 861 | 870 | 875 | 882 | 887 | 886 |
MOTTA Y300 is a range of premium low-zinc anti-wear hydraulic oils for modern high-pressure industrial and mobile systems. Selected base oils and a carefully balanced additive system combine wear protection with oxidation stability, deposit control and air release for demanding hydraulic service.
The range is designed to maintain lubrication and hydraulic response through demanding operating cycles. Shear stability and the high-viscosity-index grades support systems exposed to cold starts and elevated operating temperatures, while thermal stability limits sludge and varnish formation in deposit-sensitive equipment. Performance classifications and recommendations are shown by viscosity grade.
Air-release performance and foam control maintain effective power transmission and responsive operation. The formulation supports heavily loaded pumps and hydraulic components in industrial and mobile service.
Thermal and oxidation stability limits sludge, varnish and deposits, protecting the movement of precision valves and supporting oil service life in high-temperature, high-output circuits.
Shear stability maintains the lubricating film under mechanical stress. High-viscosity-index grades provide a useful balance between cold-start flow and protection at higher operating temperatures.
Anti-wear and corrosion protection safeguard loaded contacts and metal surfaces. Compatibility with commonly used elastomeric seals and metals supports applications incorporating different hydraulic components.
Match viscosity and performance reference to the pump, valve and temperature requirements. Use the grade coverage below when selecting HV/HVLP or other application-specific performance.
Scroll horizontally to view all grades and units.
| Reference | ISO VG grades |
|---|---|
| DIN 51524-2 (HLP) | 15, 22, 32, 46, 68, 100, 150 |
| ISO 11158 (HM) | 15, 22, 32, 46, 68, 100, 150 |
| DIN 51524-3 (HVLP) | 15, 22, 32, 46, 68 |
| ISO 11158 (HV) | 15, 22, 32, 46, 68 |
| DIN 51517-3 (CLP) | 100, 150 |
| ASTM D6158 (HVHP) | 22, 32, 46, 68 |
Scroll horizontally to view all grades and units.
| Reference | ISO VG grades |
|---|---|
| Denison HF-0 / HF-1 / HF-2 | 32, 46, 68 |
| Eaton E-FDGN-TB002-E | 32, 46, 68 |
| Bosch Rexroth 90245 | 32, 46, 68 |
| Fives Cincinnati P-68 | 32 |
| Fives Cincinnati P-70 | 46 |
| Fives Cincinnati P-69 | 68 |
| Arburg Hydraulic oil requirements | 46 |
| HUSKY Hydraulic oil requirements | 46 |
| Krauss-Maffei Hydraulic oil requirements | 32, 46 |
| Daimler Truck DTFR 31B100 / MB 341.1 | 22 |
| Ortlinghaus ON 9.2.10 / ON 9.2.19 | 32, 46, 68, 100 |
| ZF TE-ML 04K / 04R | 32, 46 |
| JCMAS HK VG32W | 32 |
| JCMAS HK VG46W | 46 |
| Valmet RAUAH00929_05_EN_V | 32, 46 |
| Valmet RAUAH02724_02_EN_V | 68, 100, 150 |
| Voith VS 108 5.3.1 (2023-04) | 150 |
| Voith VS 108 5.3.3 (2023-04) | 150 |
| Voith VS 108 5.3.4 (2023-04) | 68, 100, 150 |
| Voith VS 108 5.3.5 (2023-04) | 100, 150 |
| GB 11118.1-2011 L-HM (general) | 22, 32, 46, 68, 100, 150 |
| GB 11118.1-2011 L-HM (high pressure) | 32, 46, 68, 100 |
| GB 11118.1-2011 L-HV | 15, 22, 32, 46, 68 |
Scroll horizontally to view all grades and units.
| Property | Test Method | Unit | 15 | 22 | 32 | 46 | 68 | 100 | 150 |
|---|---|---|---|---|---|---|---|---|---|
| Kinematic Viscosity @ 40°C | ASTM D445 | cSt | 15.6 | 22.4 | 32.8 | 45.6 | 68.3 | 99.8 | 155.6 |
| Kinematic Viscosity @ 100°C | ASTM D445 | cSt | 4.08 | 5.07 | 6.64 | 8.45 | 11.17 | 13 | 17.15 |
| Viscosity Index | ASTM D2270 | - | 168 | 164 | 164 | 164 | 156 | 127 | 120 |
| Pour Point | ASTM D97 | °C | -54 | -53 | -53 | -45 | -39 | -33 | -30 |
| Flash Point (COC) | ASTM D92 | °C | 180 | 223 | 250 | 232 | 239 | 258 | 257 |
| Density @ 15°C | ASTM D4052 | kg/m³ | 837 | 842 | 845 | 850 | 862 | 877 | 882 |
MOTTA Y400 is a range of fully synthetic hydraulic oils based on wax-free PAO base stocks and a shear-stable additive system. The formulation combines low-temperature pumpability, high-temperature oxidation stability and anti-wear protection for high-pressure vane, piston and gear pumps.
Its broad-temperature performance suits equipment that must start in cold conditions and operate at elevated oil temperatures. Cleanliness, air release and multi-metal protection support precision hydraulic circuits and heavily loaded components. The range also serves specified systems incorporating gears and bearings, where the same fluid provides hydraulic power transmission and lubrication.
Wax-free synthetic base stocks provide low-temperature fluidity while the viscosity profile maintains lubrication at higher temperatures. This balance supports pump supply during cold starts and oil-film protection during hot operation.
Anti-wear performance protects loaded pump contacts, gears and bearings, limiting surface wear in high-pressure duty and maintaining the lubricating film required by demanding hydraulic components.
Thermal and oxidation stability controls sludge and deposits in hot circuits. Clean oil supports the movement of precision servo valves, especially in equipment subject to intermittent operation.
Air-release performance promotes consistent hydraulic response. Multi-metal compatibility and thin-film corrosion protection safeguard system surfaces, including equipment exposed to trace moisture or periods of standstill.
Select viscosity for the pump and operating temperatures. Before conversion, confirm seal and residual-fluid compatibility; remove accumulated water and investigate abnormal moisture ingress.
Scroll horizontally to view all grades and units.
| Reference | ISO VG grades |
|---|---|
| Denison HF-0 / HF-1 / HF-2 | 32, 46, 68 |
Scroll horizontally to view all grades and units.
| Property | Test Method | Unit | 32 | 46 | 68 | 100 |
|---|---|---|---|---|---|---|
| Kinematic Viscosity @ 40°C | ASTM D445 | cSt | 32 | 46 | 68 | 100 |
| Kinematic Viscosity @ 100°C | ASTM D445 | cSt | 6.3 | 8.2 | 11.51 | 15.94 |
| Viscosity Index | ASTM D2270 | - | 145 | 155 | 158 | 160 |
| Pour Point | ASTM D97 | °C | -56 | -45 | -53 | -52 |
| Flash Point (COC) | ASTM D92 | °C | 233 | 234 | 241 | 243 |
| Product | Grade / viscosity | Performance references | Packaging | Documents |
|---|---|---|---|---|
| MOTTA Y100Y100 | VG 32, VG 46, VG 68, VG 100, VG 150 | Grade-specific performance references | 18L, 200L | Technical Data Sheet (PDF) |
| MOTTA Y200Y200 | VG 10, VG 22, VG 32, VG 46, VG 68, VG 100, VG 150 | Grade-specific performance references | 18L, 200L | Technical Data Sheet (PDF) |
| MOTTA Y300Y300 | VG 15, VG 22, VG 32, VG 46, VG 68, VG 100, VG 150 | Grade-specific performance references | 18L, 200L | Technical Data Sheet (PDF) |
| MOTTA Y400Y400 | VG 32, VG 46, VG 68, VG 100 | Grade-specific performance references | 18L, 200L | Technical Data Sheet (PDF) |
Each product is formulated to the performance levels listed for its grade, with additive systems built for those specifications. Confirm the final selection against the equipment manufacturer's requirement.
After order and payment confirmation. Artwork and packaging preparation may add time; the quotation confirms the full schedule.
Sample size, freight and delivery schedule: confirm the terms for your product before ordering. →
Every enquiry answered within 24 hours. Trial quantities considered · Free label design · Direct export pricing
OEM / PRIVATE LABEL
Send the equipment or application, required viscosity or specification, destination market, packaging and estimated quantity. Our export team replies within 24 hours and coordinates product selection, the available technical-document pack and OEM or private-label requirements.
Production reference: 15–25 working days after order and payment confirmation. Artwork and packaging preparation may add time; the full schedule is confirmed with the quotation.
